| Criterion
6.1.6.6 Service Connections
Criterion
text:
Suitable
connections shall be provided at readily accessible locations
for filling, draining and flushing liquid systems.
Comments:
Installers are to follow the manufacturer's SRCC approved
installation requirements. This includes using the proper valves
indicated on the approved schematic and affixing identification
and information tags to these valves.
Installer
should follow the manufacturer's SRCC approved schematic to determine
the location of these valves. Figure 1 indicates where the valves
are located in this specific SRCC schematic.
Figure 1
Figure
2 shows numerous valve connections plumbed into the system for
filling, draining and flushing of the system. Note that identification
tags have been attached for easy identification.
Figure 2
Valve
tags as shown in Figure 3 are critical and required for reference
purposes.
Figure 3
Proceed
to the Next Transport Subsystem Guideline
Return
to the Transport Subsystem Main Page
|
